AW 501 25L

WTP H391 is a blended formulation based upon silicate, polyphosphate and advanced Polymer technology. WTP H391 demonstrates excellent corrosion inhibition on softened and low hardness waters. With an excellent environmental profile this product can be used where other products may cause an effluent problem.

WTP H391 is suitable for use with oxidising biocide programmes and is particularly useful where hard water is base exchanged softened.

£109.00

[ Price excluded VAT ]

Select delivery location

Description

DOSING AND TESTING

WTP H391 should be dosed continuously as a proportion of cooling tower make up water.  A reserve of 150ppm to 300 ppm of product will give the required protection for most systems.  A simple silicate test can be performed on site to control the product dose rate.

 

PPM silicate x 10 = Product reserve.

A Technical Representative will advise as to the correct dosage specific to the application.

A phosphonate drop test kit is available to determine reserves in the system (WTP TK107).

 

HANDLING

Please refer to material safety data sheet for detailed handling/storage instructions.

  • Avoid contact with eyes, skin and clothing.
  • In case of contact, immediately remove contaminated clothing and wash skin with soap and water.
  • For eyes, flush with plenty of water and seek medical attention.
  • Harmful if swallowed.

Additional information

Physical State

Yellow Liquid

pH

13

Specific Gravity (SG)

1.108 @ 16 °C

Reviews

There are no reviews yet.

Be the first to review “AW 501 25L”

Your email address will not be published. Required fields are marked *