AW 200 25L

WTP S10 is a convenient to use liquid oxygen scavenger recommended for the complete removal of oxygen from deaerator heaters, feedwater storage areas, feedwater lines, condensate return lines, boiler internals and closed recirculating water systems.

£62.00

[ Price excluded VAT ]

Select delivery location

Description

DOSAGE

WTP S10 is dosed at 18 ppm per ppm of dissolved oxygen, plus a slight excess to allow for residual testing purposes.

WTP S10 can be fed directly from the shipping container or diluted with clean condensate in a chemical mix tank. It is compatible with most boiler chemical additives, excluding filming amines.
Minimum agitation is suggested to prevent premature activation of the oxygen scavenger with oxygen captured by mechanical action at the solution interface. As a result, covered mix tanks or floating plastic plugs are desirable.

 

TESTING

WTP S10 is controlled by maintaining a fixed sulphite excess of not less than 30 ppm in boilers or 3 ppm in feedwater lines. WTP TK108 test kit is available to determine levels of sulphite.

 

HANDLING

Please refer to material safety data sheet for detailed handling/storage instructions.

  • Avoid contact with eyes, skin and clothing.
  • In case of contact, immediately remove contaminated clothing and wash skin with soap and water.
  • For eyes, flush with plenty of water and seek medical attention.
  • Harmful if swallowed.
  • Do not leave exposed to atmosphere.

Additional information

Physical State

Clear yellow liquid

Specific Gravity

1.32

pH

3.5

Reviews

There are no reviews yet.

Be the first to review “AW 200 25L”

Your email address will not be published. Required fields are marked *