AW 204 25L

WTP S22 is a boiler treatment based on sodium hexametaphosphate; it is used to precipitate calcium hardness as a mobile phosphate sludge.

WTP S22 is formulated with polymers and a dispersant that condition and mobilize the resultant phosphate sludge and aid in removal during boiler blow down.

WTP S22 delays the precipitation of hardness salts in feed lines. It may be injected continuously to feed water containing hardness salts without the formation of excessive scale in the pipe line.

£80.00

[ Price excluded VAT ]

Select delivery location

Description

TREATMENT AND DOSING

WTP S22 is dosed to maintain a phosphate reserve within set limits that are determined by the operating conditions of the boiler (e.g. boiler pressure, chemical characteristics of the water employed) according to BS 2486.

Product ml per M3 feed = 5 x (60/C + 0.6 x H)

C= Boiler Concentration Factor H = feed hardness

WTP S22 may be injected using a dosage pump or a dosage pot as appropriate to the particular installation. Its viscosity permits handling by convention dosage pumps without dilution but it may be diluted if desired using softened water or condensate.

WTP S22 is not corrosive to steel mixing tanks or dosage pumps in concentrated or dilute form. However, if dosed direct to hot boiler shells use a stainless steel injection fitting.

HANDLING

Please refer to material safety data sheet for detailed handling/storage instructions.

• Avoid contact with eyes, skin and clothing.
• In case of contact, immediately remove contaminated clothing and wash skin with soap and water.
• For eyes, flush with plenty of water and seek medical attention.
• Harmful if swallowed.

PACKAGING

WTP S22 treatments are shipped in 25 litre and 200 litre non-returnable drums

Additional information

Physical State

Clear liquid

Specific gravity (sg) @ 20°C

1.18

pH of product

6.8

Reviews

There are no reviews yet.

Be the first to review “AW 204 25L”

Your email address will not be published. Required fields are marked *